PA12 GF30 (30% Glass Fiber Reinforced)
SPECS: 30% GF | Tensile: 110-125 MPa | HDT: 165°C | Water Abs: 1.2%
FEATURES: Exceptional dimensional stability and fatigue resistance. Ideal for automotive mechanisms and sports gear.
PA12 CF30 (30% Carbon Fiber Reinforced)
SPECS: 30% CF | Tensile: 160-180 MPa | HDT: 170°C | Density: 1.18 g/cm³
FEATURES: Ultra-light and high stiffness. Superior dimensional stability. Ideal for robotics and EV components.
PA12 CF20 (20% Carbon Fiber Reinforced)
SPECS: 20% CF | Tensile: 135-155 MPa | Modulus: 12-14 GPa | HDT: 170C | Water Abs: 0.08%
FEATURES: Ultra-high stiffness-to-weight ratio and dimensional stability. Ideal for aerospace drones and IGBT power modules.
PA12 Antistatic (CF Reinforced Nylon)
SPECS: ESD Surface: 10^4-10^9 Ohm | Tensile: 110-140 MPa | HDT: 155C | Density: 1.08g/cm3
FEATURES: Permanent antistatic and lightweight carbon fiber reinforcement. Ideal for drone frames and robotic joints.
PA10T High Rigidity (Bio-based PPA)
SPECS: Bio-based | Melting Pt: 316°C | Tensile: 210 MPa | HDT: 285°C | Water Abs: 0.12%
FEATURES: High rigidity and superior chemical resistance. Ideal for high-voltage insulators and chemical pumps.
PA9T GF50 (50% Glass Fiber Reinforced)
SPECS: 50% GF | Melting Pt: 306°C | Tensile: 210 MPa | HDT: 285°C | Water Abs: 0.15%
FEATURES: Extreme heat stability and low moisture absorption. Best for EV power systems.
PA6T V0 (Flame Retardant PPA)
SPECS: UL94 V0 | Melting: 310°C | Tensile: 105 MPa | HDT: 280°C
FEATURES: Fire safety + High heat. Ideal for battery end plates and aviation electronics.
PA6T GF35 (35% Glass Fiber Reinforced)
SPECS: 35% GF | Melting Pt: 320°C | Tensile: 190 MPa | HDT: 285°C
FEATURES: High heat resistance and low moisture. Approved for Toyota, Honda, and Nissan automotive parts.
PA6 FR V0 (Flame Retardant Nylon 6)
SPECS: UL94 V0 | GWFI: 960°C | Tensile: 85 MPa | HDT: 175°C
FEATURES: Superior fire safety and electrical insulation. Ideal for EV motors and industrial inverters.