Nylon 6 PA6 endurecido a medida
ESPECIFICACIONES: PA6 a medida | Tracción: 120 MPa | Módulo de flexión: 6000 MPa | HDT: 190°C
CARACTERÍSTICAS: Alta rigidez y estabilidad térmica. Formulado a medida para piezas industriales estructurales.
PA6 templado
Póngase en contacto directamente con la fábrica de engineered polyamide & y reciba cuanto antes una oferta competitiva.
Toughened PA6 Compounds for Impact-Resistant Injection Molding
Toughened PA6 is developed for molded components where standard polyamide 6 does not provide sufficient resistance to impact, vibration, assembly stress or sudden loading. Through impact modification, the material can achieve better toughness and crack resistance while retaining the processing characteristics of PA6.
Yongjuxing supplies impact modified PA6 for automotive parts, power tools, industrial components and other applications exposed to repeated shock or mechanical stress. The formulation of toughened nylon 6 can be adjusted according to the required balance of impact strength, stiffness, heat resistance and processing performance. Reinforced formulations are also available when a component requires both structural rigidity and improved toughness.
For applications where maximum stiffness and dimensional stability are the primary requirements, compare our glass filled PA6 compounds. For components exposed to higher operating temperatures, you can also evaluate toughened PA66.
How to Select a Toughened PA6 Grade
The correct impact modified PA6 grade depends on how the molded part fails in actual use. A housing that must survive a drop test requires a different toughness balance from a structural part that must resist vibration while maintaining high rigidity.
General Impact Modified PA6
- Suitable for parts exposed to moderate impact, vibration and assembly stress.
- Helps reduce brittle cracking around clips, snap-fits and fastening points.
- Commonly used in housings, covers, brackets and general industrial molded parts.
High Impact PA6
- Selected when drop resistance and repeated impact are more important than maximum stiffness.
- Suitable for power-tool housings, protective covers, automotive components and equipment parts exposed to shock loading.
- The final grade should be selected according to required notched impact strength, elongation and operating temperature.
Reinforced Toughened PA6
- Combines impact modification with reinforcement to improve the balance between toughness and structural rigidity.
- Suitable for components that cannot use a very flexible high impact nylon 6 because dimensional stability and load-bearing capability are still required.
- Can be considered for automotive brackets, machinery parts, structural housings and other injection-molded components subject to both load and impact.
If your part mainly requires higher modulus, lower shrinkage or greater dimensional stability rather than impact resistance, a glass fiber reinforced PA6 grade may be more appropriate.
How Toughening Changes PA6 Performance
Toughening does not simply increase every property of PA6. An impact resistant nylon 6 formulation is normally developed by balancing impact resistance, stiffness, heat resistance and flow according to the end-use requirement. This balance is especially important for structural injection-molded parts.
| Property | Effect of Toughening | Why It Matters |
|---|---|---|
| Resistencia a los impactos | Increases | Reduces cracking caused by drops, collisions and sudden loading |
| Low-Temperature Toughness | Can be improved with the appropriate formulation | Important for outdoor, automotive and cold-environment components |
| Elongation | Generally increases | Allows the part to absorb deformation before brittle failure |
| Crack Resistance | Improves | Useful around clips, snap-fits, screw bosses and assembly points |
| Stiffness | May decrease as toughness increases | Reinforced toughened PA6 can be considered when higher rigidity is required |
| Resistencia a la tracción | Depends on formulation | Must be checked together with impact performance for load-bearing parts |
| Resistencia al calor | Depends on modifier and reinforcement system | Operating temperature and HDT should be confirmed before grade selection |
Toughened PA6 vs. Standard PA6
| Selection Factor | Standard PA6 | Toughened PA6 |
|---|---|---|
| Resistencia a los impactos | Suitable for general molded parts | Higher resistance to shock and sudden loading |
| Crack Resistance | More dependent on part design and moisture conditioning | Better suited to clips, snap-fits and impact-loaded areas |
| Low-Temperature Performance | Standard performance | Can be formulated for improved low-temperature toughness |
| Stiffness | Generally higher than heavily toughened grades | Depends on the level of impact modification and reinforcement |
| Typical Use | General housings and molded components | Impact-loaded housings, clips, automotive parts, power tools and industrial components |
Choose toughened PA6 when the primary problem is brittle fracture, drop failure, assembly cracking or repeated impact. If the main requirement is stiffness, dimensional stability or load-bearing capability, evaluate glass filled PA6 instead. Where both properties are required, Yongjuxing can evaluate a reinforced impact modified PA6 formulation.
Typical Applications of Impact Modified PA6
- Automóvil: clips, fasteners, structural covers, cable-management components and parts exposed to vibration or impact.
- Power Tools: drill housings, tool handles, protective covers and molded components exposed to repeated shock.
- Maquinaria industrial: guards, housings, snap-fit components and structural plastic parts subject to mechanical stress.
- Electrical Equipment: impact-resistant housings and structural components where both toughness and electrical insulation are required.
- Outdoor Equipment: components requiring improved resistance to impact under changing environmental conditions.
Where an application also requires flame resistance, see our flame retardant nylon compounds. For ESD or electrical conductivity requirements, refer to our conductive and anti-static nylon range.
Custom Impact Modified PA6 Compounds
A high impact PA6 grade should be selected according to the actual failure mode of the component rather than toughness alone. Yongjuxing can adjust the formulation of toughened nylon 6 according to mechanical, thermal and processing requirements.
- Impact resistance and elongation
- Balance between toughness and stiffness
- Glass fiber reinforcement
- Heat stabilization
- UV and weather resistance
- Flow characteristics for injection molding
- Color and appearance requirements
- Application-specific performance targets
For grade matching, send us your current material TDS, application, operating temperature, required impact performance and the failure problem you are trying to solve. Contact Yongjuxing to discuss a suitable toughened PA6 compound or request material for molding trials.