PPS GF40 (40% Glass Fiber Reinforced)
SPECS: 40% GF | Tensile: 170 MPa | HDT: 260 C | Water Abs: 0.02%
FEATURES: Extreme chemical resistance and thermal stability. Meets BMW engine specs. Ideal for precision bearings and industrial brackets.
PPA CF40 (40% Carbon Fiber Reinforced)
SPECS: 40% CF | Tensile: 300 MPa | HDT: 295 C | Density: 1.42 g/cm3
FEATURES: Ultra-high modulus metal replacement. Extreme stiffness and heat resistance. Ideal for EV battery structures and high-pressure chemical valves.
PEEK GF30 (30% Glass Fiber Reinforced)
SPECS: 30% GF | Tensile: 185 MPa | HDT: 315 C | Water Abs: 0.1 percent
FEATURES: High stiffness and chemical resistance. Ideal for semiconductor etching and vacuum chamber parts.
PEEK CF30 (30% Carbon Fiber Reinforced)
SPECS: 30% CF | Tensile: 250 MPa | HDT: 315 C | Modulus: 20 GPa
FEATURES: Extreme heat and chemical resistance. Superior stiffness. Ideal for downhole oil tools and EV high-voltage parts.
Toughened PA1010 (Bio-based High Impact)
SPECS: 100 percent Bio-content | Notched Impact: 15-25 kJ/m2 | Tensile: 45-55 MPa | HDT: 155 C
FEATURES: Exceptional low-temperature toughness and eco-friendly. Impact modified for hydraulic seals and sports equipment. High dimensional stability.
PA1010 Bio-based (Eco-friendly High Performance)
SPECS: 100 percent Bio-content | Tensile: 45-55 MPa | HDT: 160 C | Water Abs: 0.12 percent
FEATURES: Exceptional dimensional stability and eco-friendly. Ideal for chargers, relays, and precision sports gear.
PA612 GF30 (30% Glass Fiber Reinforced)
SPECS: 30% GF | Tensile: 125 MPa | HDT: 205 C | Water Abs: 1.1%
FEATURES: Excellent dimensional stability and glycol resistance. Perfect for Honda and Toyota radiator tanks and EV chargers.
PA610 Bio-based (Eco-friendly High Performance)
SPECS: 60 percent Bio-content | Density: 1.07 g/cm3 | Melting Point: 215 C | Water Abs: 1.5 percent
FEATURES: Renewable castor oil based. Superior oil resistance and dimensional stability. Ideal for fuel lines and automotive seals.
PA66 PTFE (Self-Lubricating Nylon 66)
SPECS: 15 percent PTFE | Tensile: 85-165 MPa | HDT: 250 C | Friction: 0.10
FEATURES: Excellent dry lubrication and wear resistance. Compatible with PA66 GF30 PTFE 15 specifications for automotive bushings and Bosch-style precision parts.
PA66 MoS2 (Self-Lubricating Nylon)
SPECS: 10^3 – 10^5 ohm Surface Resistivity | Tensile: 160 MPa | HDT: 250 C
FEATURES: Permanent conductivity and high mechanical strength. Ideal for ESD-safe robotics and electrical parts.
PA66 Conductive (Carbon Fiber Reinforced)
SPECS: 10^3 – 10^5 ohm Surface Resistivity | Tensile: 160 MPa | HDT: 250 C
FEATURES: Permanent conductivity and high mechanical strength. Ideal for ESD-safe robotics and electrical parts.
PA66 CF30 (30% Carbon Fiber Reinforced)
SPECS: 30% CF | Tensile: 250 MPa | Modulus: 20,000 MPa | HDT: 255°C
FEATURES: Ultra-high stiffness and lightweight. Superior impact resistance. Ideal for aerospace drones and automotive structural parts.