PA610 Bio-based is a sustainable high-performance polyamide derived from renewable castor oil. It contains over 60 percent bio-content, reducing the carbon footprint. PA610 offers a superior balance of properties between PA6 and PA12. It has much lower water absorption (1.5 percent) than PA6 or PA66. This ensures excellent dimensional stability in humid environments. With a melting point of 215 C and a density of 1.07 g/cm3 , it provides excellent oil resistance and toughness. It is the best choice for automotive fuel lines, seal skeletons, and high-pressure hydraulic systems.
PA610 Bio-based
Color: Natural, Semi-transparent
Renewable Bio-content
Low Water Absorption
Excellent Oil Resistance
Chemical Stability
Good Dimensional Stability
Automotive Fuel Systems
Industrial Sealing
Renewable Energy
Fluid Handling
Mechanical Engineering
PA610 is a high-performance bio-based nylon made from castor oil. It is a core barrier material for fuel lines. It resists gasoline, diesel, and bio-fuels. PA610 has very low fuel absorption with less than 5 percent change after 1000 hours. This stops the material from swelling or cracking. The fuel permeation rate is very low at less than 0.1g per square meter every 24 hours. It works from minus 40 to 120 Celsius for a 10-year life. Processing: Injection mold at 230 to 260 Celsius. Use 60 to 90 Celsius mold temperature. As a direct factory, we offer green solutions for sustainable fuel systems.
PA610 is a bio-based nylon for car door seal skeletons. It provides the core support for E-type and P-type rubber seals. This material has high rigidity to prevent shape changes over time. It ensures a tight fit to block water, dust, and noise from the cabin. PA610 handles high loads during door closing without fatigue damage. It offers much better size stability than PA66 in wet conditions. The bio-content helps car brands reduce their carbon footprint. Processing: Pre-dry for 4 hours at 80 Celsius. Set mold at 80 Celsius. Our factory supplies high-strength green nylon for automotive sealing.
PA610 is a high-performance bio-nylon for hydraulic pumps and valves. It is a core static seal that prevents high-pressure leaks. This material handles operating pressures from 10 to 40 MPa. It is fully compatible with mineral and synthetic hydraulic oils. PA610 resists oxidation and hydrolysis at peak temperatures of 150 Celsius. Its excellent elastic recovery ensures the system stays leak-free for years. It has lower water absorption than standard polyamides for better seal precision. Processing: Melt temperature 240 to 270 Celsius. Use 70 to 90 Celsius mold temperature for a smooth finish. We provide factory-direct bio-based nylon for industrial hydraulic safety.
Frequently asked questions about Engineered Polyamide Compound manufacturing
Our preferred payment methods are T/T. However, we are open to discussing L/C, Paypal upon request.
Yes, we conduct 100% testing on all goods prior to delivery.
We are a polyamide factory.
Engineered polyamide compounds are used in various industries such as automotive parts, electrical components, consumer goods, and industrial machinery. They are commonly found in gears, bearings, electrical housings, and under-the-hood automotive components due to their durability and resistance to heat and chemicals.
Standard delivery time is 7-14 days if the item is in stock. If not, it may take 15-20 days to arrange shipment.
Yes, we can match material colors based on your specified Pantone or RAL number.
We will reply to you in 20 minutes.
Didn’t find what you want, ask our leader for help directly!
